HOBBYKING SS SERIES 25-30A ESC QUADCOPTER
Square Carbon fiber tubes – Center: That will be fun, for sure! The KK-board needs some more adjustments, but it flies quite well considering its compact frame and overpowered components HobbyKing X quadcopter frame. Lifted of just applying throttle, was then able to hover without mentionable drift, hands off the radio for long periods. In this set you will get all you need to fly and deal with your model. It is a Hexacopter Y6 configuration, and being a test platform it was not light “at all”
I will probably experiment with aluminum and carbon fiber arms soon. For more details on the construction of my quadrocopter, see this video: Aluminium square tubes – Center: Imagine the kind of videos you can capture with your GoPro if you have no fear flying over water. Overall a good motor. But, they cost more and may have to be ordered from Asia to get the best price. HobbyKing Red Brick 25A ESC I would recommend different speed controlls like the Plush, red bricks tend to glitch once in a while 10″x6″ Propellers 3 cell mah c lipo Nice and clean construction. Pretty happy with the way it performed with only minor adjustments to the recommend initial values for the KK2 board.
The parts are slightly different from the v1. It is a Hexacopter Y6 configuration, and being a test platform it was not light “at all” Still working on configuration. Maybe you want a medium size quadcopter 40cm motor to motor Turnigy LJ Brushless Motor w the esc’s are: Water Capable Multirotors http: It was replaced by an upgraded frame called the HT which is a bit more expensive.
Just like the Dji frames, but a bit cheaper There will be two types of Basic QuadCopter. With a 3 cell mAh battery and iPhone attached, I can achieve at least 12 minutes of normal flight. The electrics are the same, but added a brand new solid frame x v3 foldable frame.
The E-flite Rhapsody Airframe was just my test fuze. HobbyKing Red Brick 25A ESC I would recommend different speed controlls like the Plush, red bricks tend to glitch once in a while 10″x6″ Propellers 3 cell mah c lipo Nice and clean construction.
But this test will help anyone intent on purchasing a 28mm size motor within this KV bracket.
The main power leads fitted to the LiPo pack are matched to the maximum discharge current that the LiPo is capable of. The Naza is good Waiting for my new Tigermotor’skv! However, it does take a lot of time and precise measurements.
I took the centerplates of the H and combined it with the Talon V1 full carbon booms. For a video, look up the words “moisdude hexacopter teaser” in YouTube ok.
Hobbyking SS Series 90-100A ESC
HK x Quadcopter Frame Kit x 1 2. KK multicopter controlboard v5.
Flight times average about 6 qusdcopter with a minute and a half reserve. I even threw her around in acro mode on that first flight.
We finally had a chance to get the Volteron gps unit on it to get a speed clock. RCTimer Carbon Fiber 10×4.
These frames make completing your quad or multirotor project a snap! Conclusion Everybody has different budgetary and time constraints. In this set you will get all you need to fly and deal with your model.
The Quad Copter Guy: Builds
Quadcopter Frame m 2. This is the second flight, I crashed it the first flight because my aileron Channel was reversed, I patched up the frame and here it is. Props are carbon reinforced 10×4. Turnigy kv ESC: Lifted of just applying throttle, was then able to hover without mentionable drift, hands off the radio for long periods.
Today I have been fine tuning the KK2 Board and also added a 3-inch thick foam squashed down to about 5mm between the gopro mounting plate and the frame. This not only acts as a bumper to prevent running into obstacles, it also makes for a great orientation aid to keep track of the front of the quad while flying. Turnigy Battery Strap x 1 DIY X specs Frame: