CISCO AIRONET 600 SERIES OFFICEEXTEND REVIEW
Prerequisites Requirements There are no specific requirements for this document. This image shows additional debug commands radio interface information: At any time, you can use the show command to display the current remote LAN configuration: If the home router happens to be using It is expected that the home teleworker installs the Cisco Aironet Series OEAP behind a home router as this product is not designed to replace the functionality of a home router. Click here to sign up.
Users who try to make changes to the GUI can lose their configurations. This screen provides radio and MAC statistics. This image shows additional debug commands radio interface information: The configuration is only allowed through the CLI, and here is an example: End-to-end voice services It supports Unified Communications for improved collaboration through messaging, presence, and conferencing and supports all Cisco Unified Wireless IP Phones for cost-effective, real-time voice services. Secure tunneling mitigates risks of viruses and attacks on the corporate network found in split-tunneling scenarios.
Stock Call for Availability. Also, the device does not supply PoE.
Verify join and confirm the Cisco logo LED is solid blue or purple. Then, wired port 4 assuming a remote 60 is configured becomes active.
Once this is known, you can look in the controller monitor statistics to determine whether the Cisco Aironet Series OEAP has joined the controller or has ever joined the controller. Remember me on this computer.
Secure tunneling mitigates risks of viruses and attacks on the corporate network found in split-tunneling scenarios. In order to officeeextend, the default username and password are admin. It can also be wall mounted, or can sit upright using the supplied cradle.
Cisco Aironet Series OfficeExtend Access Point – wireless access point Overview – CNET
This number is cumulative across the controller WLANs on the series. The corporate radio SSID and security parameters are set up and pushed down from the controller after you configure the WAN with the IP of the controllerand a successful join has occurred. This is because the current version of this product does not have firewall support, PPPoE support or port forwarding.
Try to locate the AP as close to the intended users as possible. Environmentally responsible The Series OfficeExtend Access Point enables best practices for green initiatives by reducing commuting hours and emissions.
Only the first four devices can connect until one of the devices is idle for more than one minute. It is expected that the home teleworker installs the Cisco Aironet Series OEAP behind a home router as this product is not designed to replace the functionality of a home router. This image shows the system security settings: How to interpret the event log The following event logs with comments can assist you in troubleshooting other Cisco Aironet Series OEAP connection issues.
Refer to the controller guide for details on this command. Also, if entering the MAC address into a Radius server, lower case must be used. This image shows a sample OEAP group name: Also, this should provide an indication on why, or if, a failure has occurred. Tthe tunnel can break when hotel or other ISP disconnects usually 24 hours and you would have to restart same process. Polycom Universal Power Supply – power adapter The default username and password are admin.
Refer to the controller guide for more information about this command.
Oberon, Inc. Products for Cisco Aironet 600 Series OfficeExtend Access Point
Here is an example of such a failure in the event log: Keep ID sets to less than 8 as shown in this image: May 25, Document ID: This document also provides information about the configurations necessary for proper connection and supported feature sets. If the personal network is using This is by design and is normal.
Confirm that the controller is on DMZ and reachable via the Internet. Prerequisites Requirements There are no specific requirements for this document. Here is a sample firewall configuration: