CHROMA 63200 SERIES
This surge load capability will be regulated by the temperature de-rating characteristics. Many battery discharge applications and power consumption profiles can be simulated for analysis, making the CP mode the best choice for simulating electronic device loads. For automated testing, the save and recall functions can save a great deal of time. Dedicated remote load sensors and control circuits guarantee minimum waveform distortion during dynamic loading. Call Send a quick message. The A series loads can be operated from the front panel controls or from available softpanel.
In addition, A series also provides voltage peak measurement during actual loading conditions. The A series also have overcurrent, overpower, and over temperature protections as well as over voltage and polarity reverse alarms to enhance product reliability. Chroma’s A series high power electronic loads with digital signal microprocessor MHz built in have the optimal speed and control performance. Get Best Price Request a quote. For user defined waveform and programmed sequence data download as well as firmware upgrade. These units can be synchronously paralleled up to kW and dynamically synchronized for generating complex multi-channel transient profiles.
The A series offers a digitizing function convenient for the recording of transients in both voltage and current waveforms.
To reconstruct the actual current waveform, the user can upload captured waveform data into any load via a Chroma softpanel. This feature is ideal when the average power required by the UUT is low compared to short-term peak power demands. Chroma series loads incorporate built in fan speed control to minimize the audio noise. Call Send a quick message. The sine wave loading must be greater or equal to zero ampere.
Chroma Series DC High Power Electronic Load
For battery chargers or charging stations, CV mode can change their output voltage to ensure the precision of the charging current. Dedicated remote load sensors and control circuits guarantee minimum waveform distortion during dynamic loading. The series loads use a current closed loop design connecting all power MOSFET devices in parallel, to insure high accuracy load control with minimal drift less than 0.
Load Banks in Chennai. The world leading ultra high power density design overturns the concept of oversize and difficult moving high power electronic load.
Using several loads in parallel to emulate a single load dramatically simplifies the operation. View Contact Call Seller Now. For many battery discharge applications, power consumption patterns need to be analyzed.
Ordering information – Atec Chroma-63200 Series User Manual
Precise measurements like these are ideal for testing power efficiency and other critical parameters of the UUT’s. These electronic loads also have synchronous loading capabilities to simulate the actual loading status.
The embedded PWM fan speed control reduces noise caused by fans. For multi channels output UUT.
Chroma 63200E Series
The MOSFET technology keeps the input impedance to a minimum and enables the load to draw very high current even at very low voltages. In addition to common CC, CV, CP and CR loading modes chrpma conventional loads, the A accepts digital data from DAQ cards or esries data from function generators to allow for complex waveforms to be created as depicted below.
This capability is ideal for determining worst case voltage peaks. Cnroma are many capacitors on the mainboard of PC.
It can eeries a lot of testing time for the user. The ultra high density power 6kW 4U not only saves room, its super high voltage 0. Changing and selecting menu 7. This feature provides unlimited load simulation and the possibility of power expansion. For example, the model is capable of drawing 1,A at only 1V input.
The high power ratings, parallel and synchronization capabilities make them the ideal tool for testing high power UUT’s such as SMR’s, UPS’s, batteries, and fuel cells. The DC loads have unique user defined waveform UDW capability and external analog modulating input for s imul a t ing re a l-wor ld, cus tom waveforms.
The A also offers a unique dynamic frequency sweep as shown on the right with variable frequencies up to 50kHz. As each model of the A series has 3 power ranges, they can precisely measure the voltage and current in real time. Chroma’s Series DC Loads provide a unique surge load simulation capability which allows users to overdrive the loads up to 2.
These DC loads are rel iable produc t s for engineering testing and automated test system’s integration. For example, when Load ON is pressed, the A internal clock will start counting until the battery voltage is dropped to cut off voltage or Load OFF is pressed. Under this operation, the load will display an Over Power Protection Alarm OPP and will disable the load current if the user violates the maximum surge load capability showed in the figures.
It is necessary to test the capacitive loading when turning on the power supply. The constant power, or CP mode, is ideal for these applications.
With the vacuum florescent display VFD and rotary knob, the A series loads offer versatile front panel operation. In addition, a set of data storage function has been built in for recall of the stored settings at any time. Number of Employees to People. This unique feature guarantees the best loading performance to a low voltage power supply. It saves plenty of room space and solves the space issue when upgrading the electronic load in an automated test system.
The A series provides three operating and measuring ranges. Product Specification Brand Chroma Model series.
Chroma E Series DC Electronic Load | TTid
To prevent the inrush current from occurring and trigger the over current protection of server power since the server power charges the capacitors on the mainboard. Chroma’s A series high power electronic loads with digital signal microprocessor MHz built in have the seriss speed and control performance. Refer to Note 1 in Specifications Note 3: With the LCD display and rotary knob, the electronic loads offer versatile front panel operations.
Following lists the applications of common programmed timings.
To ensure user safety and minimize power supply failure rates, overcurrent and overpower protections have to be taken into consideration during design. This surge load capability will be regulated by the temperature de-rating characteristics. For automated testing, the chrmoa and recall functions can save a great deal of time.
In addition, A series also provides voltage peak measurement during seies loading conditions. The A series loads can be operated from the front panel controls or from available softpanel.